Liebherr G 2433 Betriebsanleitung PDF herunterladen (Seite 6)

Defrosting

After the appliance has been in operation for some time, a layer

of frost or ice will form on the inside walls. This increases energy

consumption.

Caution!

Defrost the appliance as soon as the ice thickness is 5 mm.

Otherwise, the drawers cannot be opened and might become

damaged.

• Switch the appliance off to defrost. Pull out the mains plug.

• Remove the drawers and glass shelves.

• Wrap the frozen food in paper or blankets and store in a cool place.

• To speed up the defrosting process put a saucepan of hot water

on the compartment floor.

• Leave the door of the appliance open while defrosting. After

defrosting mop up the remaining water and clean the appliance.

Do not use any mechanical devices or other articial aids for

defrosting other than those recommended by the manufactur er.

Malfunctions

You may be able to rectify the following faults by checking

the possible causes yourself:

Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to

vibrate? Please note that noises caused by the refrigerant circuit

cannot be avoided.

The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Have excessive amounts of fresh food been placed in the appli-

ance?

– Does the separately installed thermometer show the correct read-

ing?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes apply

and you cannot rectify the fault

yourself, contact the nearest

customer service department

stating the type designation ➊,

service number ➋ and appliance

number ➌ as indicated on the type

plate. The type plate is located on

the inside left of the appliance.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it o and disconnect the plug or switch o or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EC Directives 2004/108/EC and 2006/95/EC.

All types and models are subject to continuous improvement and

the manufacturer therefore reserves the right to make modica-

tions to the shape, equipment and technology.

Cleaning

Before cleaning always switch o the appliance. Pull out the

mains plug or switch o or unscrew the fuse.

Clean the inside, equipment and outer walls with lukewarm water

and a little detergent. Do not use abrasive or acid cleaners or

chemical solvents.

Do not use steam cleaners because of the risk of injury and

damage.

• Ensure that no cleaning water penetrates into the electrical com-

ponents or ventilation grille.

• Dry all parts well with a cloth.

• The dust should be removed from the refrigeration unit and heat

exchanger - metal grid at the back of the appliance - once a year.

• Do not damage or remove the type plate on the inside of the ap-

pliance. It is very important for servicing purposes.

1 2 3 4 5 6 7

Kommentare zu diesen Handbüchern

Keine Kommentare

Liebherr G 2433 Betriebsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Liebherr G 2433