Liebherr 60 Bedienungsanleitung PDF herunterladen (Seite 14)

Freestanding/Semi Built In Models

Cabinet Opening Dimensions - 30" and 60" Models

The appliance can be integrated into the kitchen units. To

adapt the appliance to the height of the row of kitchen units, a

suitable top cupboard can be ﬁtted above the appliance.

Unit Venting

DO NOT restrict the air ﬂow. An air ﬂow of at least 2" (50mm)

must be provided. The opening can either be directly over the

appliance or on the back of the cabinet on top of the unit (see

ventilation requirements).

The CS models can be installed in standard 24" deep cabinets.

You will only have to make sure that the door swing clearance

is enough. It is possible to push all CS models to the rear wall

of the cabinet without modiﬁcation.

When installing the appliance next to a wall, a distance on the

hinge side of 1 27/64 inches (36 mm) minimum is required be-

tween the appliance and the wall to allow for the door handle

projection when the door is open.

Minimum Cabinet Opening Dimensions:

CS 1601, 1650

A. 29-7/8" (759 mm)

B. 23-3/16" (589 mm)

C. 85" (2159 mm)

D. 83-11/16" (2075 mm)*

SBS 32S0 (CS 1601 & CS 1650)

A. 59-1/2" (1511 mm)

B. 23-3/16" (589 mm)

C. 85" (2159 mm)

D. 83-11/16" (2075 mm)*

*Note:

The given cabinet opening height dimension includes 2" for top

air vent.

If you choose to place the vent above the cabinet or in a sofﬁt,

you will need to adjust the height dimension accordingly.

CS 1601, CS 1650, SBS 32S0

Water supply area.

Do not install the

shut-off valve behind

the appliance.

Electric outlet location

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Liebherr 60 Bedienungsanleitung Seite 14